This is a great site. I placed my order and by the next am it was available for download. Had some problems with some missing copy on some pages. Once I brought the error to the OMC's attention, the issue was resolved. I'll come back again.
The quality of this manual is good. It has all schematics and setup information for both the MDS-B3 and the MDS-B4. The scan quality is quite good, all pages are readable, This service manual also contains scans of the operating instructions from the User manual.
Quick site processing. A complete and very useful manual with all details. Thank you!
Text excerpt from page 107 (click to view)
Disassembly of the Traverse Mechanism Assy and the Pickup Assy 1 2 3 4 5 6
Remove the Bonnet and Tray Panel. Remove the Front Panel. Remove the Loading Mechanism Assy (Screws �4). Remove the Bridge (Screw �2). Pull out the Tray and remove it while unhooking a Hook. Turn the Short SW to Short side.
7 8 9
Remove the DVDM Assy (Screws �2). Remove four screws. Remove the Mechanism Holder.
8
�4
Mechanism Holder
5
-1 Bridge Hook
4
�2 -1
9
4
-2
5
-2 Bottom View
10 Remove a screw.
RearView
Cautions:
Screw is locked with Silicone adhesive. Please lock it with Silicone adhesive when installs it.
11
Short Open
Remove the FFC Holder with the state which Flexible Cable was atatched. FFC Holder
6
Short SW
10
Silicone Adhesive GEM1037
Traverse Mechanism Assy
11
Caution in the tray insertion
In the Tray insertion, insert it after matching a triangle mark of the Loading Base and a position of pin of the Drive Cam. Triangle mark Loading Base